1-800-519-7147

Machine Advisors Events

Machine Advisors Warehouse Liquidations

SPRAY LINE

Factory New Price: $900,000 USD
Product ID: MA-0602171456-03


Make: CEFLA
Model: EASY 2000 / D
Voltage: MULTI
Location: BRANTFORD (SHOWROOM) ONTARIO CANADA

Description: CEFLA/SORBINI PASS THROUGH SPRAY FINISHING SYSTEM LINE

INCLUDING;

(1) ROACH POWERED CONVEYOR (1) CEFLA TRC 4000 POWERED ROLLER CONVEYOR (2010) – (2) 1.5HP MOTORS, 2-SPEED CONVEYOR, SPEED RANGE: 2-10 M/MIN., 157” LONG X 65-1/2” WIDE, PHOTO EYE ACTIVATED WITH HEIGHT DETECTION. S/N: 10026102

(1) SORBINI VS/33-ACT-F PANEL BRUSH CLEANER WITH DEIONIZATION STATION (2004) – UPPER MOUNTED COUNTER ROTATING PANEL BRUSH, BRUSH DIAMETER:190MM, ¾ HP BRUSH MOTOR, ¼ HP MOTORIZED THICKNESS ADJUSTMENT MOTOR, UPPER MOUNTED (6) PART ACTUATED AIR BLOWERS, UPPER MOUNTED MULTI-HEAD PART ACTUATED EXIT AIR BLOW OFF UNIT, LOWER MOUNTED MULTI-HEAD PART ACTUATOR EXIT AIR BLOW OFF UNIT, VARIABLE SPEED RUBBERIZED FEED BELT CONVEYOR (1HP MOTOR), OPERATING SPEEDS: 4-20 M/MIN., PANEL THICKNESS ADJUSTMENT: 0-88 MM, MAX WORKING WIDTH: 1300 MM, PRESSURE REGULATORS BLOW OFF EACH UNIT AND PUSH BUTTON HEIGHT ADJUST WITH LED DIGITAL DISPLAY. FOR OPERATION ON 480V, 3PH WITH TRANSFORMER. S/N: ME1SC024322

(1) CEFLA EASY D/2000 RECIPROCATING SPRAY MACHINE (2004), (2) 4-HEAD RECIPROCATING SPRAY TROLLEYS, EACH DRIVEN BY A BRUSHLESS DC SERVO MOTOR, ELECTRONIC CONTROL UNIT UTILIZES A (60) CELL PHOTODIODE BAR TO MONITOR AND REGULATE SPRAY APPLICATION, FURTHER MAXIMIZING APPLICATION TRANSFER EFFICIENCY, 65” WIDE CARBON FIBER BELT ENABLES RECOVERY OF OVER-SPRAYED COATING MATERIAL FOR REUSE, APPROXIMATELY 98% OF COATING MATERIAL DEPOSITED ON BELT IS RECOVERED. BELT IS THEN AUTOMATICALLY CLEANED WITH A COATING APPROPRIATE SOLVENT (EQUIPPED WITH OPTIONAL SCOTCH-BRITE COVERED CLEANING ROLLER). UNIFORM COATING APPLICATION IS ACHIEVED USING THE “BACK SPRAY” TECHNIQUE, SUPERIOR EDGE COATING IS ACHIEVED WHEN OVER-SPRAYED COATING IS DIVERTED (A BOUNCE EFFECT) FROM THE CARBON FIBER BELT TO THE PANEL EDGES, 50” LONG X 70” (WITH A 59” WIDE BELT) RUBBERIZED INFEED BELT CONVEYOR WITH OVERHEAD MOUNTED LIGHT 57” LONG X 70” (59” WIDE BELT) OUTFEED CONVEYOR WITH PUSH BUTTON PNEUMATIC OPERATED TILTING FOR ACCESS COATING RECOVERY AND CLEANING SYSTEMS, PLC WITH TOUCH-SCREEN PROVIDES MACHINE CONTROL AND DIAGNOSTIC FUNCTIONS, AUTOMATIC AIR FLOW SYSTEM MONITORS AND MAINTAINS CONSISTENT AIR FLOW THROUGH SPRAY BOOTH, S/N 04124/9. ITW GUNS NOT INCLUDED.

(1) CEFLA EEV E3/5-FEV E3/ AND TT 117500 FLASH-OFF OVEN AND CONVEYOR W/ MOISTURE CONTROL UNIT (2004) - STEAM HEATED, HOT AIR THROUGH FEED FLASH-OFF OVEN COMPRISED OF (2) SECTIONS. UTILIZES STEAM HEAT EXCHANGERS WITH AUTOMATIC TEMPERATURE ADJUSTMENT CONTROLS TO SUPPLY AND MAINTAIN HEATED AIR TO OVEN. 1ST OVEN SECTION HAS AN EXHAUST FAN ASSEMBLY WITH A 1.5KW (2HP). ALSO MOUNTED ABOVE THE OVEN TUNNEL IS THE AIR INTAKE FAN ASSEMBLY. THIS HOUSED WITH THE HEAT EXCHANGER ASSEMBLY INTAKE FAN MOTOR: 2.5KW (3-1/3HP). 2ND OVEN SECTION OF OVEN HAS AN EXHAUST FAN ASSEMBLY WITH A 1.5KW (2HP). INTAKE FAN MOTOR: 2.2KW (3HP). OVENS ARE MOUNTED ABOVE A CEFLA TT17500 MOTORIZED CONVEYOR. S/N: 04214/5, 56' X 65".

(1) CEFLA GT180/3500 TRANSFER OVEN W/ HEAT EXCHANGE (2004) – 15’ LONG X 20’ WIDE CROSS TRANSFER IS EQUIPPED WITH AN INSULATED ENCLOSURE WHICH PROVIDES AN ENVIRONMENT OF WARM AIR MOVEMENT FOR USE IN THE FLASH-OFF PROCESS, INCLUDES EXHAUST AIR FAN. APPROX. 1 HP INFEED MOTOR AND APPROX. 3HP OUTFEED MOTOR. FOR OPERATION ON 480V, 3PH WITH TRANSFORMER.

(1) CEFLA EU 2/8 OVEN SYSTEM - TOP MOUNTED HIGH VELOCITY HOT AIR OVEN WITH ALTERNATING SECTIONS OF INFRARED LAMPS FOR USE IN THE FLASH-OFF AND DRYING OF APPLIED COATINGS/FINISHES. CONVEYOR DRIVE MOTOR: .55KW. VARIABLE SPEED WITH HAND WHEEL ADJUSTMENT. WORKING WIDTH OF 55” X APPROXIMATELY 4” IN HEIGHT THROUGH OVEN. MOUNTED ON TOP OF OVEN IS THE AIR INTAKE FAN AND EXHAUST ASSEMBLIES.

(1) CEFLA (2 HEAD) UV OVEN (2004) – APPROX. 35 KW, PAINT DRYING THROUGH 2 ULTRA VIOLET LAMP, APPROXIMATELY 54” WIDTH CAPACITY (2) UV HEAD ASSEMBLIES EACH HAVING AN END MOUNTED FAN/MOTOR ASSEMBLY 0.55 KW EACH FREE-STANDING OPERATOR/ELECTRICAL CONTROL CABINET. FOR OPERATION ON 480V, 3 PH WITH TRANSFORMER.

(1) CEFLA FEV RU2/4-TT11350/SCR JET COOLING OVEN – 10.45KW TOTAL, S/N: 0421419

(1) CEFLA TNS 7000 RUBBER BELT TRANSFER CONVEYOR W/ VACUUM TABLE (2010) - 276” LONG X 65½” WIDE (55” WIDE BELT), 1HP MOTOR, ADJUSTABLE HEIGHT FEET. FOR OPERATION ON 480V, 3 PH WITH TRANSFORMER, S/N 10026/11

(1) ROACH POWERED ROLLER CONVEYOR

YOUR KEY TO USED INDUSTRIAL WOODWORKING EQUIPMENT!

Fill out the form to make an offer on:
SPRAY LINE - CEFLA (EASY 2000 / D).

* Required Fields

*

*

*

*



*
Please fill out the form below to request a PDF quote for:
SPRAY LINE - CEFLA (EASY 2000 / D).

* Required Fields

*

*

*



*

*



*

*
CNC ROUTER / POINT TO POINT
2005 BUSELLATO (200RT)
CNC ROUTER / POINT TO POINT
LAMINATING LINE
2011 BLACK BROTHERS (775)
LAMINATING LINE
RIPSAWS
MEREEN JOHNSON (435-H/DC)
RIPSAWS
BORING / DOWEL INSERTION
2004 GANNOMAT (480 LS)
BORING / DOWEL INSERTION
CASE CLAMP
SCM (ASSEMBLA)
CASE CLAMP
RIPSAWS
RAIMANN (KM US BV)
RIPSAWS
CNC ROUTERS & POINT TO POINTS
2007 MORBIDELLI (336 NB)
CNC ROUTERS & POINT TO POINTS
CNC FEED THROUGH BORING / DOWEL LINE
2004 BIESSE (TECHNO FDT & TE...)
CNC FEED THROUGH BORING / DOWEL LINE
WIDE BELT SANDERS
VIET (CHALLENGE 333-T...)
WIDE BELT SANDERS
SHAPER
SILVER (SLH-40-DS)
SHAPER
SPRAY LINE
CEFLA (EASY 2000 / D)
SPRAY LINE
FINISHING LINE
2006 CEFLA (ROTOSTAIN RT 20...)
FINISHING LINE